SATA III (6 Gbps) and PATA to PCI Express Gen2 Card

The S3-PCIE1XG201 is a SATA III (6 Gbps) and PATA to PCI Express Gen2 Host Bus Adapter.

The S3-PCIE1XG201 provides both SATA and ATA/ATAPI functions. It supplies two 6 Gbps SATA ports and one PATA port.

The S3-PCIE1XG201 brings a high-performance 3 or 6 Gbps SATA and PATA hardware RAID solution to desktop/consumer storage applications utilizing a 1-lane PCI Express 2.0 interface. The S3-PCIE1XG201 supports devices compliant with the Serial ATA International Organization: Serial ATA Revision 3.0 specification and the ATA/ATAPI-7 specification.

USB 3.0 to PCI Express Gen2 Card

(Phased out)
U3-PCIE1XG201 is a USB 3.0 to PCI Express Gen2 Host Bus Adapter.
The U3-PCIE1XG201 complies with Universal Serial Bus 3.0 Specification, and Intel’s eXtensible Host Controller Interface (xHCI).
The U3-PCIE1XG201 uses a PCI Express bus interface, and it is applicable for PCI Express solutions with host PC systems.
The U3-PCIE1XG201 supports data transfer up to 5 Gbps when connecting to USB 3.0 compliant peripherals, while maintaining compatibility with existing USB peripheral devices.

Quad Channel USB 2.0 to PCI Express Card

U2X4-PCIE1X01 is a Quad Channel USB 2.0 to PCI Express single lane Host Adapter.

The PCI Express interface of U2X4-PCIE1X01 is fully compliant with PCI Express base 1.1 specifications. The four independent USB host ports are integrated with on‐chip transceivers and support both Enhanced Host Controller Interface (EHCI) and Open Host Controller Interface (OHCI).

U2X4-PCIE1X01 is a cost-effective solution for USB 2.0 connectivity and performance. Since each port operates independently, all four ports can provide the USB 2.0 high speed rate (480Mbps) at the same time.

One to Five SATA Port Multiplier RAID Controller (SPM393)

Highlights

• 1-to-5 SATA II (3.0Gbps) Port Multiplier
• OS independent Hardware RAID
• Supports RAID levels: 0 / 1 / 3 / 5 / 10 / JBOD / Clone
• Supports Hot Spare on RAID
• Supports more than 2TB RAID drive
• Supports Multiple RAID (Configured as Multiple Volume RAID)
• Rebuild speed: 200GB/hour